Biosynthesis of zinc oxide nanoparticles using Euphorbia milii leaf constituents: Characterization and improved photocatalytic degradation of methylene blue dye under natural sunlight

A facile biosynthesis route was followed to prepare zinc oxide nanoparticles (ZnO NPs) using Euphorbia milii (E. milii) leaf constituents. The SEM images exhibited presence of spherical ZnO NPs and the corresponding TEM images disclosed monodisperse nature of the ZnO NPs with diameter ranges between 12 and 20 nm. The Brunauer–Emmett–Teller (BET) analysis revealed that the ZnO NPs have specific surface area of 20.46 m²/g with pore diameter of 2 nm–10 nm and pore volume of 0.908 cm³/g. The EDAX spectrum exemplified the existence of Zn and O elements and non-appearance of impurities that confirmed pristine nature of the ZnO NPs. The XRD pattern indicated crystalline peaks corresponding to hexagonal wurtzite structured ZnO with an average crystallite size of 16.11 nm. The FTIR spectrum displayed strong absorption bands at 512 and 534 cm^?1 related to ZnO. The photocatalytic action of ZnO NPs exhibited noteworthy degradation of methylene blue dye under natural sunlight illumination. The maximum degradation efficiency achieved was 98.17% at an illumination period of 50 min. The reusability study proved considerable photostability of the ZnO NPs during photocatalytic experiments. These findings suggest that the E. milii leaf constituents can be utilized as suitable biological source to synthesis ZnO NPs for photocatalytic applications.     

Simultaneous determination of novel β-lactamase inhibitor WCK 4234 and Meropenem in dog plasma by LC–MS/MS and its application to preclinical pharmacokinetic study

A precise and accurate liquid chromatography–tandem mass spectrometric (LC–MS/MS) bioanalytical method has been developed and validated for the simultaneous quantification of WCK 4234 and meropenem (MEM) in dog plasma. Protein precipitation using acetonitrile was employed as a sample preparation approach. Cefepime was used as an internal standard. The developed method was selective, sensitive (limit of quantification, 0.075 μg/ml for both drugs), accurate (recovery > 90%), precise (CV < 10%) and linear (r² ≥ 0.99, concentration range 0.075–120 μg/ml for both analytes). The developed method was successfully applied for the determination of both drugs in plasma to assess the pharmacokinetics in beagle dogs. WCK 4234 + MEM in a 1:1 ratio at 15 + 15 and 30 + 30 mg/kg doses were administered by the intravenous route. The mean plasma concentration and area under the concentration–time curve of WCK 4234 ranged from 38.3 to 77.4 μg/ml and from 47.8 to 77.1 μg h/ml, respectively, and the values for MEM ranged from 52.2 to 115.3 μg/ml and 70.5 to 133.6 μg h/ml respectively. The elimination half-life of WCK 4234 and MEM was around 0.8 h.     

Modified layered bimetallic compound used as a novel adsorbent for the solid-phase extraction of monoaromatic hydrocarbons from water samples prior to gas chromatography–mass spectrometry

This study reports a promising method of solid-phase extraction for determining the toluene, ethylbenzene, p-xylene, m-xylene, o-xylene, 1,3,5-trimethylbenzene, and 1,2,4-trimethylbenzene in water samples by gas chromatography–mass spectrometry (GC–MS). Prior to this procedure, the magnesium–aluminum bimetallic hydroxides modified with sodium dodecylbenzenesulfonate (Mg/Al-SDBS-LDH) were prepared and served as the novel solid-phase extractant. The Mg/Al-SDBS-LDH has advantage of good hydrophobicity and larger spacing which facilitates the monoaromatic hydrocarbons (MAHCs) into the interlayer for adsorption. As a result, the seven MAHCs in 500 mL water samples were enriched greatly, and the theoretical enrichment factor reached to 125 times. Under the optimized conditions of solid-phase extraction (SPE) and GC–MS, the mass concentration of each MAHC (0.005–10, 0.01–10, or 0.05–10 ng/mL) had a fine linear relationship with peak area. The correlation coefficients were more than 0.995. The detection limits were between 0.001 and 0.01 ng/mL, and the RSD were between 3.1% and 6.6%. The method had been applied to determine the seven MAHCs in the Dongfengqu river water and laboratory wastewater of Chengdu University of Technology successfully.     

MM工质热分解及其对ORC系统影响的研究

热稳定性是限制有机工质在有机朗肯循环(Organic Rankine Cycle,ORC)使用的重要因素。硅氧烷类工质具有低毒环保、化学性质稳定等优点,适用于150~350℃热源。本文研究了六甲基二硅氧烷(MM)工质热分解的特点及其对ORC系统的影响,结果表明,MM的热分解产物为硅氧烷类化合物及微量气态小分子碳氢化合物;热分解将导致系统性能下降,分解量足够大时,会出现蒸发器换热不充分导致膨胀机入口处工质干度低于1从而影响机组安全的问题。     

功能模板导向合成介孔三氧化钨及其光电化学性能

以钨酸(H₂WO₄)为钨前驱体,十二烷胺(DDA)为模板剂,利用模板剂的结构导向功能,合成了比表面积为57.3 m²·g^-1的介孔三氧化钨(DDA-WO₃),是未用DDA制备的非介孔WO₃(H₂WO₄-WO₃)的2.35倍。X射线衍射(XRD)结果表明,400 ℃下煅烧的DDA-WO₃是具有单斜晶型结晶孔壁的无序介孔结构。此外,400~550 ℃下煅烧的DDA-WO₃的结晶度均高于同条件的H₂WO₄-WO₃。400 ℃下的DDA-WO₃/FTO(掺氟氧化锡)在1.0 V的Ag/AgCl偏压作用下,可以产生0.18 mA·cm^-2的饱和光电流,是H₂WO₄-WO₃/FTO(0.06 mA·cm^-2)的3倍。增强的光电化学(PEC)活性主要因为DDA-WO₃/FTO的大表面积降低了低结晶度对PEC性能的不利影响,成为影响PEC活性的主要因素。500 ℃煅烧导致了DDA-WO₃/FTO介孔结构的坍塌,但高的结晶度仍然保持其优越的PEC催化活性。     

热源塔热泵系统夏季工况优化运行实验研究

由于热源塔在冬夏季工况下的换热能力存在较大差异,按冬季工况设计的热源塔热泵系统,在夏季工况下运行时存在换热能力过剩的问题,影响系统性能。为解决上述问题,本文构建了热源塔热泵系统,实验研究了其冬夏季工况的性能差异。在此基础上,对夏季工况下的优化运行进行了实验研究,结果表明,通过调节空气和溶液流量,将热源塔的逼近度和冷幅分别控制在3.5℃和4.3℃,可使得系统性能系数由3.6提升至3.9,并对其节能机理进行了分析。     

SU-8光栅结构中的液晶激光特性

设计制作了SU-8光栅结构的染料掺杂手性向列相液晶激光器件,在器件正面和侧面均实现了随机激光辐射。将激光染料PM597、手性剂S-811、向列性液晶TEB30A按一定比例均匀混合,注入反平行摩擦处理的液晶盒中,器件的下基板通过光掩模法刻蚀出周期为15μm的光栅。利用532 nm的Nd∶YAG固体脉冲激光器作为泵浦源,器件的侧面既在580~590 nm范围内出现了多个离散分立的随机激光辐射峰,FWHM约0.19 nm,又在579~585 nm范围内出现独立的两个激光辐射峰,FWHM约0.19 nm;在器件正面获得了584~590 nm范围的随机激光辐射谱,FWHM约0.17 nm。加热器件至61℃,液晶相变为各向同性态,器件侧面仍出现了波长约590.60 nm、FWHM约0.24 nm的激光辐射峰。分析得出,液晶盒中引入SU-8光栅结构后,光子同时在液晶分子间多重散射和SU-8光栅中布拉格反射获得反馈放大,两种机制相辅相成。器件侧面出现的独立激光辐射峰主要由SU-8光栅布拉格反射提供反馈放大形成,而器件侧面和正面的随机激光辐射峰主要由液晶分子间多重散射提供反馈放大形成。     

靶丸支撑膜对ICF内爆性能影响的模拟研究

使用二维多群辐射扩散流体力学程序LARED-S，模拟研究靶丸支撑膜在惯性约束聚变氘氘（DD）气体靶内爆过程中的扰动演化过程及其对内爆性能的影响.二维模拟表明：靶丸支撑膜显著降低DD气体靶内爆的中子产额，二维模拟产额为一维结果的55.2%.内爆性能下降的主要物理机制是支撑膜使靶壳生成大幅度的尖钉深入DD气体区，使烧蚀层与DD气体之间物质界面处的电子热传导漏失功率显著增大，导致DD核反应速率显著降低，中子反应速率峰值时刻（bang-time时刻）提前.相比一维理想内爆的模拟结果，支撑膜引入的扰动显著降低bang-time时刻DD气体压强与内爆动能转化为DD气体内能的效率，壳层剩余动能相应大幅增加.     

工质对微通道沸腾液膜瞬态变化的影响

本文采用去离子水和无水乙醇两种工质,利用微通道流动沸腾同步测量实验系统,研究了液膜厚度的瞬态变化规律,实验发现流动沸腾形成的初始液膜厚度在毛细数Ca很宽的范围内都遵循Taylor流动原理;液膜形成后,在蒸发和蒸汽流动携带的耦合作用下,厚度迅速减薄直至蒸干;由于水的汽液黏度比小,速度梯度小,剪切作用带来的液膜厚度减少量小,且水的汽化潜热大,吸收相同热量时蒸发量小,导致水的液膜厚度变化斜率较小,通过理论分析提出了沸腾液膜厚度变化的计算模型,计算结果与实验结果的误差小于20%。     

Effects of hydroxyl groups and hydrogen passivation on the structure,electrical and optical properties of silicon carbide nanowires

The effects of hydrogen and hydroxyl passivation on the structure, electrical and optical properties of SiCNWs were investigated. The passivation performance of different atoms (groups) were discussed by analyzing the distribution of electronic states and the polarity of chemical bonds. The results show that passivation can improve the stability of SiCNWs structure, and the effect of hydroxyl is better than hydrogen passivation. And hydrogen and hydroxyl passivation both increase the band gap of SiCNWs, and the changing trend of band gap is relevant to the polarity of the covalent bond formed by the passivation of surface atoms. Moreover, passivation enhances the stability of the optical properties of SiCNWs, resulting in narrowing of light absorption, photoconductivity and other spectra, and the response peak shifts to the deep ultraviolet region, which means that hydrogen or hydroxyl passivation of SiCNWs is likely to be a candidate material for deep ultraviolet micro-nano optoelectronic devices.